TP-LINK CPE510 Manual Do Utilizador
Chapter 6 Wireless Tab
Auto – The system automatically detects whether root device supports data
frames with the format of three/four address fields, giving priority to the
format of four address fields. The selection of Auto is recommended.
frames with the format of three/four address fields, giving priority to the
format of four address fields. The selection of Auto is recommended.
Security Mode
Select the security mode of this device. To access the wireless network of root
AP, the security mode should be set the same as that of root AP.
AP, the security mode should be set the same as that of root AP.
None - Select this option if the root AP has no encryption. At the moment, it’s
no need to enter a password to access the wireless network of root AP.
no need to enter a password to access the wireless network of root AP.
WPA-PSK - Select this option if the security mode of the root AP is WPA-PSK.
Enter the parameters including the version and encryption of WPA and PSK
key, which must coincide with those of the root AP.
Enter the parameters including the version and encryption of WPA and PSK
key, which must coincide with those of the root AP.
WEP - Select this option if the security mode of the root AP is WEP. Enter the
parameters including authentication type, key format and WEP key, which
must coincide with those of the root AP.
must coincide with those of the root AP.
Wireless AP Settings
Wireless AP settings are only available in the modes of Access Point, Bridge, AP Router, and AP Client
Router.
Router.
Wireless Radio
Check the wireless radio box to enable this device to send and receive the
wireless signal.
wireless signal.
SSID
Enter a character string no more than 32 characters to name your wireless
network. The default SSID is TP-LINK_Outdoor_xxxxxx (xxxxxx is the last six
characters of the MAC address of this device). We suggest you to set an easy-to-
remember SSID to conveniently identify your wireless network.
network. The default SSID is TP-LINK_Outdoor_xxxxxx (xxxxxx is the last six
characters of the MAC address of this device). We suggest you to set an easy-to-
remember SSID to conveniently identify your wireless network.
Enable SSID Broadcast
Check this option, AP will broadcast its SSID to hosts in the surrounding
environment, as thus hosts can find the wireless network identified by this SSID.
If SSID Broadcast is not enabled, hosts must enter the AP’s SSID manually to
connect to this AP.
environment, as thus hosts can find the wireless network identified by this SSID.
If SSID Broadcast is not enabled, hosts must enter the AP’s SSID manually to
connect to this AP.
Security Mode
Select the security mode of wireless network. If all the hosts are allowed to access
the wireless network, please select None. For the safety of wireless network, you
are suggested to encrypt your wireless network. This device provides three
security modes: WPA (Wi-Fi Protected Access), WPA-PSK (WPA Pre-Shared Key)
and WEP (Wired Equivalent Privacy). WPA-PSK is recommended. Settings vary in
different security modes as the details is in the following introduction.
the wireless network, please select None. For the safety of wireless network, you
are suggested to encrypt your wireless network. This device provides three
security modes: WPA (Wi-Fi Protected Access), WPA-PSK (WPA Pre-Shared Key)
and WEP (Wired Equivalent Privacy). WPA-PSK is recommended. Settings vary in
different security modes as the details is in the following introduction.
- 61 -