TP-LINK CPE510 Manual Do Utilizador
Chapter 6 Wireless Tab
Filtering Rules
There are two filtering policies to control the MAC filtering:
Allow the stations specified by any enabled entries in the list to access.
The stations listed below are allowed to access the wireless network under
the rules. While others are forbidden to access.
the rules. While others are forbidden to access.
Deny the stations specified by any enabled entries in the list to access.
The stations listed below are forbidden to access the wireless network under
the rules. While others are allowed to access.
the rules. While others are allowed to access.
Wireless Advanced Settings
Distance Settings
Enter the distance between AP and Station, which will influence the wireless
performance to a great extent. If this device serves as a client, please enter the
distance between this device and the root AP. If this device configured as an AP,
please enter the distance between the farthest client and this AP. The value is
limited to 0-24km.
performance to a great extent. If this device serves as a client, please enter the
distance between this device and the root AP. If this device configured as an AP,
please enter the distance between the farthest client and this AP. The value is
limited to 0-24km.
Beacon Interval
Beacons are transmitted periodically by the device to announce the presence of
a Wireless network for the clients. Beacon Interval value determines the time
interval of the beacons sent by the device. You can specify a value from 40 to
1,000. The default value is 100.
a Wireless network for the clients. Beacon Interval value determines the time
interval of the beacons sent by the device. You can specify a value from 40 to
1,000. The default value is 100.
RTS Threshold
When the RTS threshold is activated, all the stations and APs follow the Request
to Send (RTS) protocol. When the station is to send packets, it will send a RTS to
AP to inform the AP that it will send data. After receiving the RTS, the AP notice
other stations in the same wireless network to delay their transmitting of data.
At the same time, the AP inform the requesting station to send data. The value
range is from 0 to 2346 bytes. The default value is 2346, which means that RTS is
disabled.
to Send (RTS) protocol. When the station is to send packets, it will send a RTS to
AP to inform the AP that it will send data. After receiving the RTS, the AP notice
other stations in the same wireless network to delay their transmitting of data.
At the same time, the AP inform the requesting station to send data. The value
range is from 0 to 2346 bytes. The default value is 2346, which means that RTS is
disabled.
Fragmentation Threshold
Specify the fragmentation threshold for packets. If the size of the packet is larger
than the fragmentation threshold, the packet will be fragmented into several
packets. Too low fragmentation threshold may result in poor wireless
performance caused by the excessive packets. The recommended and default
value is 2346 bytes.
than the fragmentation threshold, the packet will be fragmented into several
packets. Too low fragmentation threshold may result in poor wireless
performance caused by the excessive packets. The recommended and default
value is 2346 bytes.
- 66 -