Intel BONANZA S478 I875 ATX DDR BLKD875PBZLK Manual Do Utilizador
Códigos do produto
BLKD875PBZLK
Intel Desktop Board D875PBZ Technical Product Specification
116
4.5 Security Menu
To access this menu, select Security from the menu bar at the top of the screen.
Maintenance
Main
Advanced Security
Power
Boot
Exit
The menu represented by Table 66 is for setting passwords and security features.
Table 66. Security Menu
If no password entered previously:
Feature Options
Description
Supervisor Password
No options
Reports if there is a supervisor password set.
User Password
No options
Reports if there is a user password set.
Set Supervisor Password
Password can be up to seven
alphanumeric characters.
alphanumeric characters.
(Note 1)
Specifies the supervisor password.
User Access Level
(Note 2)
• No Access
• View Only
• Limited
• Full (default)
• View Only
• Limited
• Full (default)
Sets the user access rights to the BIOS Setup
Utility.
Utility.
No Access prevents user access to the BIOS
Setup Utility.
Setup Utility.
View Only allows the user to view but not
change the BIOS Setup Utility fields.
change the BIOS Setup Utility fields.
Limited allows the user to changes some
fields.
fields.
Full allows the user to changes all fields
except the supervisor password.
except the supervisor password.
Set User Password
Password can be up to seven
alphanumeric characters.
alphanumeric characters.
(Note 1)
Specifies the user password.
Clear User Password
(Note 3)
• Ok (default)
• Cancel
• Cancel
Clears the user password.
Chassis Intrusion
• Disabled (default)
• Log
• Log, notify once
• Log, notify until cleared
• Log
• Log, notify once
• Log, notify until cleared
Disabled = Disables Chassis Intrusion
Log = Logs the intrusion in the event log
Log, notify once = Halts system during POST.
User must press <F4> to continue. Intrusion
flag is cleared and the event log is updated.
User must press <F4> to continue. Intrusion
flag is cleared and the event log is updated.
Log, notify til cleared = Halts system during
POST. User must enter BIOS setup Security
Menu and select “Clear Chassis Intrusion
Status” to clear the Chassis intrusion flag.
POST. User must enter BIOS setup Security
Menu and select “Clear Chassis Intrusion
Status” to clear the Chassis intrusion flag.
Notes:
1. Valid password characters are A-Z, a-z, and 0-9.
2. This feature is displayed only if a supervisor password has been set.
3. This feature is displayed only if a user password has been set.