Fujifilm FinePix Z10fd & SD Card 1GB 15777218+SD/1GB Manual Do Utilizador

127

• The Memory Card contact area is soiled.
• The Memory Card format is incorrect.

• Camera fault.
• The Memory Card is damaged.

• Wipe the contact area on the Memory Card with a 

soft, dry cloth. It may be necessary to format the 

Memory Card (

➝p.103). If the message still 

appears, replace the Memory Card.

• Contact your FUJIFILM dealer.

[\ MEMORY FULL]

[Y MEMORY FULL]

The internal memory or Memory Card is full.

Erase some images in internal memory or Memory 
Card (

➝p.38), or use an Memory Card that has 

ample free space.

• The data could not be recorded due to an Memory 

Card error or a connection error between the 
Memory Card and camera.

• The image cannot be recorded as it is too large to 

fit in the available space on the Memory Card.

• The Memory Card or internal memory is not 

formatted.

• Re-insert the Memory Card or turn the camera off 

and then on again. If the message still appears, 
contact your FUJIFILM dealer.

• Use a new Memory Card.

• Format the Memory Card or internal memory on 

the camera (

➝p.103).

The SD Memory Card switch is slide to the “Lock” 
side.

Unlock the protection by sliding it back (

➝p.18).

The data could not be recorded or copied since the 
internal memory is full.

Erase some images from the internal memory 
(

➝p.38), or use a Memory Card that has ample free 

space.

The timing for recording was incorrect because the 
Memory Card was formatted on a PC.

Use an Memory Card that was formatted on the 
camera.

The frame number has reached 999-9999.

A Insert a formatted Memory Card into the camera.
B Set RENEW as the FRAME NO. setting in the 

[

 SET-UP] menu (

➝p.99).

C Start taking pictures (The frame number starts 

from “100-0001”).

D Set CONT. as the FRAME NO. setting in the [

 

SET-UP] menu.

Continued Q