Native Instruments Traktor Kontrol S4 MK2 22400 Ficha De Dados
Códigos do produto
22400
►
On the left Deck, move the jog wheel’s outer rim in the desired direction to temporarily
bend the tempo and adjust the phase in order to cancel any minor offset.
bend the tempo and adjust the phase in order to cancel any minor offset.
→ Your tracks now perfectly match.
Note that this can also be useful when using TRAKTOR’s Sync feature. Indeed, in some
situations, the automatic beat detection might need a slight correction: for example, in
situations, the automatic beat detection might need a slight correction: for example, in
tracks with unusual low frequency content, the beat “feeling” might occur slightly after the
beat as detected by TRAKTOR. If you couldn’t make it to manually correct the Beatgrid of
beat as detected by TRAKTOR. If you couldn’t make it to manually correct the Beatgrid of
your track before you go on stage, you can cancel the offset on the fly with the jog wheel’s
outer rim.
outer rim.
Mixing In the New Track
►
When you’re ready, you can bring the crossfader over from Deck B and slowly mix in the
track in Deck A.
track in Deck A.
→ You just did your first handmade mix with TRAKTOR KONTROL S4!
Don’t expect to be capable of manually matching beats right away, though—this requires in-
tensive training and can’t be fully explained here in detail. Practice makes perfect!
tensive training and can’t be fully explained here in detail. Practice makes perfect!
4.3
Adjusting Levels
Before going any further, we would like you to be aware of how important it is to have your mix
at the right level. We provide you here with a few simple hints in order to get the best sound
out of your mix.
Even if this section might look a bit technical, please take the time to read these few pages, as
they can save you a lot of trouble, especially in a live situation!
at the right level. We provide you here with a few simple hints in order to get the best sound
out of your mix.
Even if this section might look a bit technical, please take the time to read these few pages, as
they can save you a lot of trouble, especially in a live situation!
4.3.1
The Theory
By mixing, you blend together signals coming from different sources (and possibly process
them on the way).
The basic rule is: you need to ensure that no signal is clipping, while simultaneously trying to
use the full dynamic range available. Just to keep it short, there are two reasons behind this:
them on the way).
The basic rule is: you need to ensure that no signal is clipping, while simultaneously trying to
use the full dynamic range available. Just to keep it short, there are two reasons behind this:
Tutorials
Adjusting Levels
Traktor Kontrol S4 - Manual - 40