Fujifilm FinePix Z10fd & SD Card 1GB 15777153+SD/1GB Manual Do Utilizador

71

• Make sure the receiving camera is turned on when 

transmitting image data.

• If the image is 3:2 ratio, white lines may appear at the 

top and bottom or right and left of the print, depending 
on the printer type.

• Movie images cannot be transmitted.
• Images photographed with a camera other than FinePix 

Z10fd may not be printed or transmitted.

Refer to the manual provided with the receiving device for 
more information.

Receiving the image data from a FUJIFILM digital camera is 
shown as an example here. You can receive data from 
another device in the same way.

C Point the infrared port on the transmitting camera 

directly at the infrared port on the receiving camera 
(

➝p.11). Transmission distance is about 5 to 20 cm (2 

to 7.9 in.) within approx. 15°.

D Press MENU/OK to begin transmission.

When transmission is completed, 
[TRANSMISSION COMPLETED] will appear 
on the LCD monitor.

(Angle: up to approx.15°)

A Turn the camera on.

B Press p or q to select the sending frame 

(file).

(Angle: up to approx.15°)

Continued Q