Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 Ficha De Dados

Códigos do produto

1-F8075

<Before Use>

Installation and Removal of the HT5F1800B

Transmitter Battery
Attachment of the battery

1. Slide the battery cover on the bottom of the

transmitter toward the right side and open it.

2. Install the battery in the holder.
3. Connect the battery connector.

4. Close the battery cover completely.

Battery Removal
Note: If you remove the battery while the

power is on, the data you have set will not

be saved.

1. Open the battery cover.
2. Disconnect the battery connector.
3. Press on the battery release tab and pull the

battery downwards to remove.

4. Close the battery cover completely.

Warning

Be careful not to drop the battery.

Never disconnect the battery connector

from the T14SG transmitter after turning

off the power until the screen is completely

blank and the transmitter has shut down

completely.

* Internal devices such as memories may be damaged.
* If there is any problem, the message "Backup Error" will

be shown the next time when you turn on the power of the

transmitter. Do not use the transmitter as it is. Send it to the

Futaba Service Center.

① Push to open.

②Slide in the direction of the

arrow on the battery cover.

③ Battery cover will open downward.

Battery

release tab

Connector