Benq PH460 Manual Do Proprietário
Network connection
27
Network connection
Connecting to a LAN
To set the display to connect to a local area network:
1. Connect a RJ45 cable to the corresponding ports on the display and your LAN
1. Connect a RJ45 cable to the corresponding ports on the display and your LAN
switch or router.
2. Enter the OSD menu Setting > Control Setting. Select LAN.
3. Enter the next OSD menu Setting > Network Settings.
3. Enter the next OSD menu Setting > Network Settings.
If you are in a DHCP environment, select DHCP > Execute and press ENTER.
Once done, the IP Address, Subnet mask, Default gateway, Primary DNS,
and Secondary DNS settings will be displayed.
If you are not in a DHCP environment, select Manual > Execute and press
ENTER
. Contact your ITS administrator for information on the IP Address,
Subnet mask
, Default gateway, Primary DNS, and Secondary DNS settings
and enter it accordingly.
4. To save the settings and return to the previous menu, highlight Execute and press
ENTER
on the remote control.
Controlling the display
Once you have the correct IP address for your display and the display is on or in standby
mode, you can use any computer that is on the same local area network to control the
display.
1. Enter the IP address of the display in the address bar of your browser and press
Enter.
2. The setting page appears.
• Information: Shows information of the display. It is for information only. There are no
• Information: Shows information of the display. It is for information only. There are no
items that can be set.
• Picture & Sound: Provides options for picture and sound adjustments.
• Screen: Provides options related to display adjustments.
• Setting: Provides options for advanced display adjustments.
• Mail Report: Provides options for setting up email accounts to receive status or error
• Screen: Provides options related to display adjustments.
• Setting: Provides options for advanced display adjustments.
• Mail Report: Provides options for setting up email accounts to receive status or error
reports sent from the display.
• Network: Provides options for manually setting the display’s IP address or obtaining an
IP address from a DHCP server. Provides options for setting or changing the user name
and password to secure this network control system.
and password to secure this network control system.
• You cannot control the display via the RS-232C connector when LAN control is in use.
• It is recommended that you use Internet Explorer versions 7.0 or higher browser.
• It is recommended that you use Internet Explorer versions 7.0 or higher browser.
Make sure the Setting > Control Setting menu is set to LAN if you would like to turn on the
display from a web page.