Benq PH460 Manual Do Proprietário

The OSD (On-Screen Display) menu

32

 menu

Name

Description

PAP Setting
(Picture and 

Picture)

• PAP: Turns on or off the PIP (Picture in Picture) and PBP (Picture by 

Picture) functions.

• Active Picture: For the PIP, selects the main or sub picture to operate. 

For the PBP, selects the left or right picture to operate. Swaps the main/ 

sub or left/right pictures.

• Picture Size: Changes the size of the sub picture.
• Picture Position: (PIP only) Changes the position of the sub picture.

• PAP is not available for all signal source combinations. See 

 for more information on supported combinations.

• In PAP mode, only sound from the active picture will be available.

• H. Monitors/V. Monitors: Sets the number of displays used in the 

horizontal/vertical direction.

• H. Position/V. Position: Sets the horizontal/vertical position of the 

display wall matrix. 

• Frame Comp.: Adjusts images near the display edges for optimal 

demonstration across the display wall.

• LED: Turns the power indicator on the display on or off.
• Power On Delay: Choose to enable or disable a sequence in turning 

on the screen matrix. If enabled, the display will turn on one horizontal 

matrix starting from the top row.

Sets the picture’s aspect ratio.
• Wide Zoom: Enlarges to fill screen with minimum distortion.
• Zoom: Enlarges the picture, keeping the same aspect ratio.