Bradley Brand Furniture COMBI5500 Manual Do Utilizador

Installation Instructions

3

Bradley Corporation • 215-329 Rev. J; EN 04-732C

6/28/04

• 1" NPT supply piping to flush valve
• Toilet/Lav waste connections
• For optional air valve manifold or self-closing valve: 1/2" NPT supply piping
• For optional Touch Time™ solenoid valve:

1/8" NPT supply piping
Wire nuts sized for 22 AWG wire to connect to 24 VAC power source

1. Rough-in wall opening using one of the three versions shown in Figure 1 on page 4.

2. Rough-in water supply(s) for lavatory:

• 1/2" NPT connection required when piping in for air valve manifold (length of tubing

supplied). For air valve manifold assembly installation, refer to Bradley Installation Manual
(part no. 215-1158) provided with the manifold assembly.

• 1/2" NPT connection required when piping in for self-closing valve. For self-closing valve

assembly installation, refer to Bradley Installation Manual (part no. 215-581) provided with
the self-closing valve assembly.

• 1/8" NPT connection required when piping in for Touch Time™ solenoid valve. (Note:

Length of tubing supplied.) For Touch Time™ solenoid valve installation, refer to Bradley
Installation Manual (part no. 215-1378) for Touch Time™ solenoid valve assembly .

3. Rough-in a 1-1/4" or 1-1/2" NPT (size dependent on options ordered) lavatory waste  outlet at

the dimensions shown in Figure 1.

4.  Rough-in a 1" NPT supply inlet to flush valve.

5. Rough-in a toilet waste outlet at the dimension shown in Figure 1 (waste outlet size dependent

on options ordered).