Wegener Communications 6420 Manual Do Utilizador

iPump 6420 User’s Manual

www.wegener.com

800070-01 Rev B

Chapter 1, Page 15

Characteristic

Specification

File selection keywords
(used in any file-play
specification for an insert)

1) SHUFFLE—select files to play from folder such that

each plays once before any repeat, but order is
different each time through

2) RANDOM—select files to randomly play from folder,

but without any repeats

3) SEQUENTIAL—Like SHUFFLE, but maintains same

play order each time through file list in folder

Insertion “Profiles”

Pre-silence

mutes live for programmable period

before file insert starts

Post-silence

mutes live for programmable period after

file insert ends

3) Programmable

attenuation

of file audio during insert

4) “

Duck

” allows live to mix with file audio during insert

at programmable attenuation

Transitions on file
insertions

Seemless. No inserted silence.

Synchronization of inserts
to live audio track

1) Compel NETCON DELAY
2) Compel Extended Syntax command delay

Analog Audio Output

Measured at 256 kbps audio ES rate, stereo mode

Output Level-MAX PPL

+18.0 dBm into 600 ohms @ 0 dB attenuation
+24.0 dBm is optional

Output level adjust range

0 to 20 dB attenuation in 1 dB steps from Output Levels
above

Output Impedance

Balanced: < 60 Ω

Frequency Response

20Hz to 20 kHz, + 0.5/-1.5 dB
50 Hz to 15 kHz, ± 0.5 dB

Phase Accuracy

50 Hz to 15 kHz, ≤ ±2° from linear phase

SNR

≥ 88 dB (22 Hz to 20 kHz) unweighted

Harmonic Distortion

(1KHz test-tone, 1dB below PPL)

< 0.1%

Dynamic Range

16-Bit Delta Sigma DAC

Muting

Muting control of each Audio Decoder (port) is available,
muting both analog & digital outputs in tandem

Digital Audio Output

Supplied for two main audios

Protocol

Balanced 16-bit AES3 audio,
Sample rate per each audio output

Output Impedance

Differential pair, 110 ohms

Output level

Non-adjustable 5 VP-P

Muting

Muting control of each Audio Decoder (port) is available,
muting both analog & digital outputs in tandem