VIZIO TL-R480T Manual Do Utilizador

protocols supported by the router). 

 

 - The Enable checkbox to enable the virtual server entry. 

 

 - Some common services already listed in the pull-down 

list. 

To setup a virtual server entry:   
1.  Select the service you want to use from the Common Service Port list, select the ID 

you want to use, and click the Copy to button. If the Common Service Port list 
does not have the service that you want to use, type the number of the service port 
or service port range in the Service Port box. 

2.  Type the IP address of the computer in the Server IP Address box.  
3.  Select the protocol used for this application, either TCP,UDP, or All. 
4. Select 

the 

 checkbox to enable the virtual server. 

5. Click 

the 

 button.   

 It is possible that you have a computer or server that has more than one type of 

available service. If so, select another service, and enter the same IP address for that 
computer or server. 

To modify a virtual server entry: 
1.  Select the entry you want to modify. 
2.  Modify the information from the Service Port, the IP Address boxes, and the 

pull-down list. 

3. Click 

the 

 button. 

To delete a service entry: 
1.  Clear the entry's all information except for the Protocol pull-down list. 
2. Click 

the 

 button. 

To delete all service entries: 
1.  Click the Clear All button. 
2.  Click the Save button 

Click the Next button to go to the next page and Click the Previous button to return the 
previous page. 

: If you set the virtual server of the service port as 80, you must set the web 

management port on Security –> Remote Management page to be any value except 
80 such as 8080. Or else there will be a conflict to disable the virtual server. 

Some applications require multiple connections, like Internet games, video 
conferencing, Internet calling and so on. These applications cannot work with a pure 

 

- 25 -