VIZIO TL-R480T Manual Do Utilizador

filtering entry, click the Add New… button. The page " Add or Modify a MAC Address 
Filtering entry

" will appear, shown in figure 5-28:   

 

Figure 5-28    Add or Modify a MAC Address Filtering entry 

To add or modify a MAC Address Filtering entry, follow these instructions: 
1.  Enter the appropriate MAC address into the MAC Address field. The format of the 

MAC address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 
00-0E-AE-B0-00-0B. 

2.  Type the description of the PC in the Description field. Fox example: John’s PC. 
3.  Status - Select Enabled or Disabled for this entry on the Status pull-down list. 
4. Click 

the 

 button to save this entry. 

To add additional entries, repeat steps 1-4. 
When finished, click the Return button to return to the MAC Address Filtering page. 

To Modify or delete an existing entry: 
1.  Find the desired entry in the table. 
2. Click 

 or Delete as desired on the Edit column. 

Click the Enable All button to enable all entries. 
Click the Disable All button to disable all entries.     
Click the Delete All button to delete all entries. 

Click the Next button to go to the next page and click the Previous button to return to the 
previous page. 

If you want to block the PCs with MAC addresses 00-0A-EB-00-07-BE 

and 00-0A-EB-00-07-5F to access the Internet, first, enable the Firewall and MAC 
Address Filtering

 on the Firewall page, then, you should specify the Default MAC 

Address Filtering Rule "Deny these PCs with effective rules to access the Internet" 
on the Firewall page and the following MAC Address filtering list on this page:

 

 

You can configure the Remote Management function on this page shown in figure 5-29. 
This feature allows you to manage your Router from a remote location, via the Internet.  

 

- 34 -