VBrick Systems Server ETV v3.1 Manual Do Utilizador
22
© 2005 VBrick Systems, Inc.
Advanced Settings
Advanced settings are enabled if you select a VBrick encoder or a VBStar. Note that the Portal
Server will attempt to retrieve and autofill the Multicast IP addresses and Port numbers. You can
modify these fields as necessary.
Server will attempt to retrieve and autofill the Multicast IP addresses and Port numbers. You can
modify these fields as necessary.
Set Top Boxes
All STB (Set Top Boxes) must be configured in ETV Portal Server before they can be
managed and used for scheduled events. Once configured, all STBs in the system are shown
on the following window. The
managed and used for scheduled events. Once configured, all STBs in the system are shown
on the following window. The
Select STB
panel in the next screen shows STBs that have
announced their presence on the network but have not been configured for use in the Portal
Server.
Server.
T
To add an STB configuration:
1. Go to
Global Settings > STBs
.
Note
The following values are stored in the Portal Server database only. Depending on
how a scheduled event is configured, they may be saved and written back to the
VBrick device after the scheduled event runs.
how a scheduled event is configured, they may be saved and written back to the
VBrick device after the scheduled event runs.
Multicast IP
Destination multicast IP address.
Video Port
Destination video port.
Audio Port
MPEG-4 devices only. Destination audio port.
CC Port
MPEG-4 devices only. Closed captioning port.