Sterling Home Theater Server 882.00249.00 Manual Do Utilizador

2–Pump 12-Station Controllers 

Chapter 4: Operation 

36 

STATION:-- OFFLINE

TIME:  --- LOGO 

 

P1:S--:--- OFFLINE

P2:S—-:--- OFFLINE 

 

In Single Pump mode, the screen displays as shown below. The upper left corner displays the 
active station being loaded. If the system has no active station, two (2) hyphens 

--

 in the 

station area display. The lower left corner displays the load time in seconds. When a station is 
loading, this area displays how much time elapses during the load cycle. If no station is 
active, three (3) hyphens 

---

 display. 

The upper right area displays the status of the control. This section displays the condition of 
the controller, and what action is occurring in the loading sequence. The different status 
displays are described on 

Pages 24 and 25

. 

The lower right section of the display is not used in Single Pump mode. It simply displays the 
manufacturer’s logo. 

 

 
 
 
 

In Dual Pump mode, the screen displays as shown on the following page. The first line of the 
screen displays information for Pump 1 and the second line of the screen displays information 
for Pump 2. 

Each line has twenty (20) characters divided into two (2) groups of ten (10). From the left 
character position, P0 S:--:--- is read as “Pump 0 Station --:Load Time ---.” This screen 
displays important information in an easy-to-read display. The right ten (10) character group 
displays the status of the specific pump. Again, the different status displays are described on 

Pages 24 and 25

.