Solo USA 280 Manual Do Utilizador

MS 270, MS 270 C, MS 280, MS 280 C

Recommended cutting attachments 
for compliance with § 5.11 of  ANSI 
standard B 175.1-2000 
(see page 14 of this manual):

STIHL reduced kickback bar 
(with green label) for .325" pitch:
Rollomatic with sprocket nose
16, 18 or 20" (40, 45 or 50 cm)
STIHL low kickback chain

1)

(with green label) for 0.325" pitch
Rapid-Micro 2 (23 RM2, 26 RM2)
Rapid-Micro C3 (23 RMC3, 26 RMC3)
for 3/8“ pitch
Rapid-Micro 2 (33 RM2, 36 RM2)
Rapid-Super C3 (33 RSC3, 36 RSC3)
Chain sprocket:
7-tooth for .325" pitch
7-tooth for 3/8“ pitch

1)

See definition of  "low kickback 
chain" on page 17.

In order to comply with the kickback 
performance requirements of  § 5.11 of 
ANSI standard B 175.1-2000, do not use 
replacement saw chain unless it has 
been designated as meeting the ANSI 
§ 5.11 requirements on this specific 
powerhead, or has been designated as  
"low kickback" saw chain

1)

 in 

accordance with the  ANSI B 175.1-2000 
standard.

Since new bar/chain combinations may 
be developed after publication of this 
manual, ask your STIHL dealer for the 
latest recommendations.
Other bars and chains available for this 
powerhead are:

STIHL yellow-labeled guide bars:
For .325" and 3/8“ pitch:
Rollomatic “S“ with sprocket nose 
16, 18 or 20" (40, 45 or 50 cm )
Duromatic with stellite tipped nose
16, 18 or 20" (40, 45 or 50 cm)
STIHL yellow-labeled chains:
for .325" pitch:
Rapid Micro (23/26 RM, 23/26 RMC)
Rapid Super (23/26 RS)
for 3/8“ pitch:
Rapid Micro (33/36 RM),
Rapid Super (33/36 RSC, 33/36 RSK  

1)

See definition of  "low kickback 
chain" on page 17.

Contact your STIHL dealer for 
information regarding special 
accessories that may be available for 
your product.