SMC Networks TIGERSWITCH 10/100 Manual Do Utilizador
M
ULTICAST
C
ONFIGURATION
2-89
Web – Click IGMP, IGMP Configuration. Adjust the IGMP settings
as required, and then click Apply. (The default settings are shown
below.)
as required, and then click Apply. (The default settings are shown
below.)
CLI – This example modifies the settings for multicast filtering, and
then displays the current status.
then displays the current status.
Interfaces Attached to a Multicast Router
Multicast routers use the information obtained from IGMP Query,
along with a multicast routing protocol such as DVMRP, to support
IP multicasting across the Internet. These routers may be
dynamically discovered by the switch or statically assigned to an
interface on the switch.
along with a multicast routing protocol such as DVMRP, to support
IP multicasting across the Internet. These routers may be
dynamically discovered by the switch or statically assigned to an
interface on the switch.
Console(config)#ip igmp snooping
Console(config)#ip igmp snooping query-count 10
Console(config)#ip igmp snooping query-max-response-time 20
Console(config)#ip igmp snooping router-port-expire-time 300
Console(config)#ip igmp snooping version 2
Console(config)#exit
Console#show ip igmp snooping
Console#show ip igmp snooping
Igmp Snooping Configuration
----------------------------------------------
Service status
----------------------------------------------
Service status
: Enabled
Querier status
: Enabled
Query count
: 10
Query interval
: 100 sec
Query max response time : 20 sec
Query time-out
Query time-out
: 300 sec
IGMP snooping version
: Version 2
Console#