SMC Networks TIGERSWITCH 10/100 Manual Do Utilizador
S
YSTEM
M
ANAGEMENT
C
OMMANDS
3-29
Example
This example shows how the set the access level and password for
a user.
a user.
enable password
After initially logging onto the system, you should set the
Privileged Exec password. Remember to record it in a safe place.
Use this command to control access to the Privileged Exec level
from the Normal Exec level. Use the no form to reset the default
password.
Privileged Exec password. Remember to record it in a safe place.
Use this command to control access to the Privileged Exec level
from the Normal Exec level. Use the no form to reset the default
password.
Syntax
enable password [level level] {0 | 7} password
no enable password [level level]
no enable password [level level]
• level level - Level 15 for Privileged Exec. (Levels 0-14 are not
used.)
• {0 | 7} - 0 means plain password, 7 means encrypted
password.
• password - password for this privilege level.
(Maximum length: 8 characters plain text, 32 encrypted, case
sensitive)
Default Setting
• The default is level 15.
• The default password is “super”
• The default password is “super”
Command Mode
Global Configuration
Command Usage
• You cannot set a null password. You will have to enter a
Console(config)#username bob access-level 15
Console(config)#username bob password 0 smith
Console(config)#
Console(config)#username bob password 0 smith
Console(config)#