SMC Networks TIGERSWITCH 10/100 Manual Do Utilizador
C
OMMAND
L
INE
I
NTERFACE
3-50
Example
dot1x timeout tx-period
Sets the time period during an authentication session that the
switch waits before re-transmitting an EAP packet. Use the no
form to reset to the default value.
switch waits before re-transmitting an EAP packet. Use the no
form to reset to the default value.
Syntax
dot1x timeout tx-period seconds
no dot1x timeout tx-period
no dot1x timeout tx-period
seconds - Number of seconds. (Range: 1-65535 seconds)
Default
30 seconds
Command Mode
Global Configuration
Example
Console(config)#dot1x timeout re-authperiod 300
Console(config)#
Console(config)#
Console(config)#dot1x timeout tx-period 300
Console(config)#
Console(config)#