SMC Networks TIGERSWITCH 10/100 Manual Do Utilizador
IP C
OMMANDS
3-79
Example
To show all lines, enter this command:
IP Commands
There are no IP addresses assigned to this switch by default. You
must manually configure a new address to manage the switch over
your network. You may also need to a establish a default gateway
between this device and management stations that exist on
another network segment.
must manually configure a new address to manage the switch over
your network. You may also need to a establish a default gateway
between this device and management stations that exist on
another network segment.
Console#show line
Console configuration:
Password threshold: 3 times
Interactive timeout: Disabled
Silent time: Disabled
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Interactive timeout: Disabled
Silent time: Disabled
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Vty configuration:
Password threshold: 3 times
Interactive timeout: 65535
Interactive timeout: 65535
Console#
Command
Function
Mode Page
ip address
Sets the IP address for this device
IC
ip dhcp restart Submits a BOOTP or DCHP client request PE
ip
default-gateway
default-gateway
Defines the default gateway through
which an in-band management station can
reach this device
which an in-band management station can
reach this device
GC
show ip
interface
interface
Displays the IP settings for this device
PE
show ip
redirects
redirects
Displays the default gateway configured
for this device
for this device
PE
ping
Sends ICMP echo request packets to
another node on the network
another node on the network
NE,
PE
PE