SMC Networks TIGERSWITCH 10/100 Manual Do Utilizador
C
OMMAND
L
INE
I
NTERFACE
3-84
show ip redirects
Use this command to show the default gateway configured for
this device.
this device.
Default Setting
None
Command Mode
Privileged Exec
Example
Related Commands
ping
Use this command to send ICMP echo request packets to another
node on the network.
node on the network.
Syntax
ping host [count count][size size]
• host - IP address or IP alias of the host.
• count - Number of packets to send. (Range: 1-16, default: 5)
• count - Number of packets to send. (Range: 1-16, default: 5)
• size - Number of bytes in a packet. (Range: 32-512,
default: 32)
The actual packet size will be eight bytes larger than the size
specified because the switch adds header information.
The actual packet size will be eight bytes larger than the size
specified because the switch adds header information.
Default Setting
This command has no default for the host.
Console#show ip redirects
ip default gateway 10.1.0.254
Console#
ip default gateway 10.1.0.254
Console#