SMC Networks TIGERSWITCH 10/100 Manual Do Utilizador
C
OMMAND
L
INE
I
NTERFACE
3-130
Example
The following example shows how to add VLANs 1, 2, 5 and 6 to
the allowed list as tagged VLANs for port 1:
the allowed list as tagged VLANs for port 1:
switchport forbidden vlan
Use this command to configure forbidden VLANs. Use the no form
to remove the list of forbidden VLANs.
to remove the list of forbidden VLANs.
Syntax
switchport forbidden vlan {add vlan | remove vlan}
no switchport forbidden vlan
no switchport forbidden vlan
• add vlan - VLAN ID to add.
• remove vlan - VLAN ID to remove.
• remove vlan - VLAN ID to remove.
Do not enter leading zeroes. (Range: 1-4094)
Default Setting
No VLANs are included in the forbidden list.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
• This command prevents a VLAN from being automatically
added to the specified interface via GVRP.
• If a VLAN has been added to the set of allowed VLANs for an
interface, then you cannot add it to the set of forbidden VLANs
for that same interface.
for that same interface.
Console(config)#interface ethernet 1/1
Console(config-if)#switchport allowed vlan add 1
Console(config-if)#switchport allowed vlan add 2
Console(config-if)#switchport allowed vlan add 5
Console(config-if)#switchport allowed vlan add 6
Console(config-if)#
Console(config-if)#switchport allowed vlan add 1
Console(config-if)#switchport allowed vlan add 2
Console(config-if)#switchport allowed vlan add 5
Console(config-if)#switchport allowed vlan add 6
Console(config-if)#