SMC Networks TIGERSWITCH 10/100 Manual Do Utilizador
C
ONFIGURING
THE
S
WITCH
2-42
Changing the Aging Time
You can set the aging time for entries in the dynamic address table.
Command Attributes
•
Aging Time – The time after which a learned entry is
discarded.
(Range: 2-172800 seconds; Default: 300 seconds)
discarded.
(Range: 2-172800 seconds; Default: 300 seconds)
Web – Click Address Table, Address Aging. Specify the new aging
time, click Apply.
time, click Apply.
CLI – This example sets the aging time to 400 seconds.
Spanning Tree Algorithm Configuration
The Spanning Tree Algorithm (STA) can be used to detect and
disable network loops, and to provide backup links between
switches, bridges or routers. This allows the switch to interact with
other bridging devices (that is, an STA-compliant switch, bridge or
router) in your network to ensure that only one route exists
between any two stations on the network, and provide backup
links which automatically take over when a primary link goes
down.
disable network loops, and to provide backup links between
switches, bridges or routers. This allows the switch to interact with
other bridging devices (that is, an STA-compliant switch, bridge or
router) in your network to ensure that only one route exists
between any two stations on the network, and provide backup
links which automatically take over when a primary link goes
down.
STA uses a distributed algorithm to select a bridging device
(STA-compliant switch, bridge or router) that serves as the root of
the spanning tree network. It selects a root port on each bridging
(STA-compliant switch, bridge or router) that serves as the root of
the spanning tree network. It selects a root port on each bridging
Console(config)#mac-address-table aging-time 400