Siemens Gigaset 3070 Manual Do Utilizador

System functions

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619

giga3070KAP.fm

09.01.01

Activating/deactivating charge display for the previous call

With Gigaset Comfort/Classic telephones, pressing the 

D

 key lets you dis-

play the costs/units accumulated for the previous call at the telephone.

Press 



 for selection menus.

Select using [

ˆ

] and [OK]: 

Service Set up

 

→

Settings

 

→

 

System settings 

→

 

Cost/duration

.

Enter the base PIN and confirm with [OK]. 

Select using [

ˆ

] and [OK]: 

Last charge

, 

Call Duration

 are deactivated.

Configuring determination of costs

Providers today no longer have to transmit call charges in units. They can also 
immediately transmit the currency amount. This option will become more 
widespread in the near future.

Gigaset 3070/75isdn can detect the changeover on the network side from units 
to charges or vice versa. The user is then requested to switch over this option 
manually. The available options are: "Units Cent.Off.", "Costs Cent.Off.", "No 
Rate", "Rate --.--" and "Rate ----". "Units Cent.Off." is active as standard. 

The factor relates to both "Units Cent.Off." and "Costs Cent.Off.". Thus with a 
factor of 0.20, when "Units Cent.Off." is set, for example, each unit should cost 
0.20 DM. If "Costs Cent.Off." is set, costs should only be assigned the factor 
0.2 - in this case this would mean that 80% of the call charges would not be 
recorded.

With factors < 1 and the setting "Costs Cent.Off.", the amount displayed does 
not cover the call charges.

●

Before the charges for each call can be calculated, the currency and price per 
unit must be defined.

Press 



 for selection menus.

Select using [

ˆ

] and [OK]: 

Service Set up

 

→

Settings

 

→

 

System settings 

→

 

Cost/duration

.

Enter the PIN and confirm with [OK].

Select using [

ˆ

] and [OK]: 

Access type

.

Select using [

ˆ

] and [

9

]: 

Rate --.--

 (with decimal point) or 

Rate ----

 (without decimal point). 

Enter the basic price and confirm with [

9

].

Select using [

ˆ

] and [OK]: 

Save entry

.

If you would like to set an additional currency:

Enter the currency and confirm [

9

].

Select using [

ˆ

] and [OK]: 

Save entry

.

If [No Rate ] was already set a prompt is displayed.

Confirm the prompt for accounting method with [YES].

All accounts are reset and the option is highlighted.