Ryobi Outdoor RY80030 Manual Do Utilizador

Página de 26
4
SPECIFIC SAFETY RULES
n
  NEVER  DIRECT  A  WATER  STREAM  TOWARDS 
PEOPLE  OR  PETS,  OR  ANY  ELECTRICAL 
DEVICE.
BEFORE  STARTING  ANY  CLEANING  OPERATION, 
close doors and windows. Clear the area to be cleaned 
of debris, toys, outdoor furniture, or other objects that 
could create a hazard.
NEVER PICK UP OR CARRY A MACHINE WHILE THE 
ENGINE IS RUNNING.
n
  NEVER  START  THE  MACHINE  if  ice  has  formed  in 
any part of the equipment.
n
  DO  NOT  USE  ACIDS,  ALKALINES,  SOLVENTS, 
FLAMMABLE MATERIAL, OR INDUSTRIAL GRADE 
SOLUTIONS 
in this product. These products can cause 
physical injuries to the operator and irreversible damage 
to the machine.
n
  ALWAYS OPERATE THE MACHINE on a level surface. 
If  the  engine  is  at  an  incline,  it  could  seize  due  to 
improper lubrication (even at the maximum oil level).
n
  WARNING:  HIGH  PRESSURE  JETS  CAN  BE 
DANGEROUS  IF  SUBJECT  TO  MISUSE.  The  jet 
must  not  be  directed  at  persons,  animals,  electrical 
devices, or the machine itself.
NEVER  ATTEMPT  TO  MAKE  ANY  ADJUSTMENTS 
WHILE THE ENGINE (MOTOR) IS  RUNNING 
(except 
where specifically recommended by the manufacturer).
n
  PROTECTIVE  COVERS  MUST  ALWAYS  COVER 
ROTATING  PARTS  WHEN  THE  ENGINE  IS 
RUNNING.
KEEP COOLING AIR INTAKE (recoil starter area) and 
muffler  side  of  the  engine  at  least  3  feet  away  from 
buildings, obstructions, and other burnable objects.
KEEP THE ENGINE AWAY FROM FLAMMABLES AND 
OTHER HAZARDOUS MATERIALS.
KEEP AWAY FROM HOT PARTS. The muffler and other 
engine parts become very hot, use caution.
DO NOT TOUCH THE SPARK PLUG AND IGNITION 
CABLE 
when starting and operating the engine.
n
  CHECK  FUEL  HOSES  AND  JOINTS  for  looseness 
and fuel leakage before each use.
n
  CHECK BOLTS AND NUTS for looseness before each 
use.  A  loose  bolt  or  nut  may  cause  serious  engine 
problems.
ALWAYS REFUEL OUTDOORS. Never refuel indoors or 
in a poorly ventilated area.
NEVER  STORE  THE  MACHINE  WITH  FUEL  IN  THE 
FUEL TANK INSIDE A BUILDING
 where ignition sources 
are present, such as hot water and space heaters, clothes 
dryers, and the like.
IF THE FUEL TANK HAS TO BE DRAINED, DO THIS 
OUTDOORS.
n  TO REDUCE THE RISK OF FIRE AND BURN INJURY, 
handle fuel with care. It is highly flammable.
n
  DO NOT SMOKE WHILE HANDLING FUEL.
ADD FUEL BEFORE STARTING THE ENGINE. Never 
remove  the  cap  of  the  fuel  tank  or  add  fuel  while  the 
engine is running or when the engine is hot.
n  LOOSEN FUEL CAP SLOWLY to release pressure and 
to keep fuel from escaping around the cap.
REPLACE ALL FUEL TANK AND CONTAINER CAPS 
SECURELY.
n  WIPE SPILLED FUEL FROM THE UNIT. Move 30 feet 
away from refueling site before starting engine.
IF FUEL IS SPILLED, do not attempt to start the engine 
but move the machine away from the area of spillage and 
avoid creating any source of ignition until fuel vapors have 
dissipated.
n  NEVER  ATTEMPT  TO  BURN  OFF  SPILLED  FUEL 
UNDER ANY CIRCUMSTANCES.
n  BEFORE STORING, ALLOW THE ENGINE TO COOL.
STORE FUEL IN A COOL, WELL-VENTILATED AREA, 
safely away from spark and/or flame-producing equip-
ment. 
STORE FUEL IN CONTAINERS specifically designed for 
this purpose.
n  EMPTY FUEL TANK AND RESTRAIN THE UNIT FROM 
MOVING before transporting in a vehicle.
WHEN  SERVICING  USE  ONLY  IDENTICAL  RYOBI 
REPLACEMENT  PARTS.
  Use  of  any  other  parts  may 
create a hazard or cause product damage.
USE COLD WATER ONLY.
MAKE SURE MINIMUM CLEARANCE  of 3 feet is main-
tained from combustible materials.
SAVE THESE INSTRUCTIONS. Refer to them frequently 
and use them to instruct other users. If you loan someone 
this tool, loan them these instructions also.