RTS SSA-424A Manual Do Utilizador

Optional call signal input using the GPI

In AZedit, click GPI In on the toolbar.
This opens the GPI Setup screen.

Whichever GPI Input you are using for 4-wire call 
receive, select that GPI Input from the list (double-
click).
This will open the Edit GPI Input window.

In the Port Alpha list box, select the intercom port 
that is named in step 1.

In the Key Number box, type 1.
This selects key 1 at the intercom you specified in the 
previous step.

Select Talk Key.

Click Done.

Access keypanel setup, and select the intercom port 
that is named in step 1.
Make sure the setup page, Main is selected.

Assign talk key number 1 to talk to the intercom port 
that you selected in step C. We also recommend that 
you assign auto-listen (AL) to the listen key above that 
talk key.

Optional call enable control. If you connected a GPI 
Output for use as a call enable control, you can assign 
that GPI output to any intercom key in the 4-wire 
intercom system. If System A is connected to an 
Audiocom or TW intercom system, pressing the key will 
disable the call signaling. (However, the effect is 
opposite if a Clear-Com system is connected: pressing 
the key will disable the signaling.)

Send your changes to the intercom system. This 
completes any required programming for ADAM, 
ADAM CS, or Zeus intercom system.