Rocketfish RF-BTCMBO Manual Do Utilizador
24
• If the keyboard and mouse fail to work, check the USB keyboard and
mouse functions in your system’s BIOS. The functions should be enabled
for the normal use of the keyboard and mouse. For detailed settings, see
“Enabling the USB keyboard and mouse function in BIOS“ on page 14.
for the normal use of the keyboard and mouse. For detailed settings, see
“Enabling the USB keyboard and mouse function in BIOS“ on page 14.
• If your PC system’s BIOS setup has options for the keyboard or mouse,
make sure they are set to default settings. If you are not familiar with the
BIOS, refer to your PC’s manual for more information.
BIOS, refer to your PC’s manual for more information.
• Only use the mouse on a clean, flat surface in order to ensure smooth
and accurate cursor action. If you use a mouse pad, choose a
light-colored one, not a dark one, to use less battery power.
light-colored one, not a dark one, to use less battery power.
• For further assistance with any other questions you may have, contact
Rocketfish at
(800) 305-2204
for technical support.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply within the
limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
product is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply within the
limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.