Toshiba SATELLITE A10 Manual Do Utilizador
73
Getting Started
Using external display devices
5.375 x 8.375 ver 3.1
The selections available are:
❖
Built-in display panel only
❖
Built-in display panel and external device
simultaneously
simultaneously
❖
External device only
3
Release the
Fn
key for the selection to take effect.
TECHNICAL NOTE: You can also change these settings using
the Display Properties box in the Control Panel.
the Display Properties box in the Control Panel.
Adjusting the quality of the external display
To obtain the best picture quality from your external display
device, you may need to adjust the video settings. See the
documentation supplied with the device for additional
configuration steps.
device, you may need to adjust the video settings. See the
documentation supplied with the device for additional
configuration steps.
TECHNICAL NOTE: In order to use the simultaneous mode,
you must set the resolution of the internal display panel to
match the resolution of the external display device. The
external display device must support a resolution of 640 X 480
or higher.
you must set the resolution of the internal display panel to
match the resolution of the external display device. The
external display device must support a resolution of 640 X 480
or higher.
Display limitations
Keep in mind that the quality of the display will be limited to
the capabilities of the external video device.
the capabilities of the external video device.