Nikkor Nikon Nikkor AF-S Manual Do Utilizador

16

■ Aperture

Aperture is adjusted using camera controls.

■ Built-in Flash Units

When using the built-in flash on cameras equipped with a 
built-in flash unit, remove the lens hood to prevent vignetting 
(shadows created where the end of the lens obscures the 
built-in flash).

■ The Lens Hood

The lens hoods protects the lens and blocks stray light that 
would otherwise cause flare or ghosting.

When attaching or removing the hood, hold it near the 

 

symbol on its base and avoid gripping it too tightly. 
Vignetting may occur if the hood is not correctly attached.

The hood can be reversed and mounted on the lens when not in 
use.  When the hood is reversed, it can be attached and 
removed by rotating it while holding it near the lock mark (

—{

).

Align the lens hood lock mark (—{) with 
the lens hood mounting mark (●) on the 

lens (e).