Hughes DIRECWAY DW4020 Manual Do Utilizador

In post-commissioning, you peak the satellite signal, attach the 
DW4020 to the customer computer that has a functioning 
Ethernet interface, and confirm the customer can surf the Internet.

1. Unplug the DW4020 power cord from the wall outlet or surge 

protector.

2. Remove the phone line and network cable from the installer 

laptop PC.

3. Remove the network cable from the Gateway and unplug the 

USB cable from the receive modem.

4. Connect a long USB cable from the back of the receive 

modem to the installer laptop PC.

5. Assemble and install the satellite antenna.
6. Place the outdoor pointing interface (OPI) in the receive 

cable line if applicable.

7. Power on the DW4020.Select 

→Programs→DIRECWAY 

→Antenna Pointing. 

The 

Antenna Pointing - Antenna 

Location 

screen appears. See Figure 25.

8. Verify the ZIP code matches the antenna location and select 

Next. The 

 screen appears. Check 

the Longitude, Hemisphere, and Frequency values. See 
Figure 26.

Figure 25: Antenna Location; verify ZIP code