Asko WCAM 1812 Manual Do Utilizador
CUSTOMER CARE CENTER 800.898.1879 www.askousa.com
G E T T I N G S TA R T E D
Pre-wash Button (E)
For heavily soiled items, press this button
to run the pre-wash cycle. Be sure to put
detergent in the pre-wash compartment of
the detergent drawer. The button glows while
the pre-wash cycle option is on.
to run the pre-wash cycle. Be sure to put
detergent in the pre-wash compartment of
the detergent drawer. The button glows while
the pre-wash cycle option is on.
Note: Pre-wash cannot be used with any
Delicate program.
Delicate program.
Extra Rinse Button (F)
Select this option to add one or two extra
rinse cycles. The Extra Rinse Button glows
when the option is on. See pages 11-12 for
information regarding the number of rinse
cycles added to various programs when you
select this option. Recommended for those
with soft water or detergent allergies. Note:
Option not available with Quick Wash, Spin,
and Dry programs.
rinse cycles. The Extra Rinse Button glows
when the option is on. See pages 11-12 for
information regarding the number of rinse
cycles added to various programs when you
select this option. Recommended for those
with soft water or detergent allergies. Note:
Option not available with Quick Wash, Spin,
and Dry programs.
Start Button (G)
Once you have set the wash program,
drying time, and pre-wash or extra rinse
options, press this button to start the
program.
options, press this button to start the
program.
8
Understanding the Control Panel
On/Off Button (A)
Press this button to turn the main power to the machine on or off.
When the power is on and the Program Knob is on the Stop position,
the Start (G) button flashes.
When the power is on and the Program Knob is on the Stop position,
the Start (G) button flashes.
Program Knob (B)
Refer to the table on pages 11-12 to determine the right program for
your current wash load. Turn knob to select correct program.
your current wash load. Turn knob to select correct program.
Stop Position
To stop the machine after starting a program, turn the Program Knob
to the Stop position. When you interrupt a program by turning the dial
to Stop, the door lock remains engaged for a two-minute safety delay,
after which you may open the machine door. To restart the machine,
reposition the Program Knob and press Start (G).
to the Stop position. When you interrupt a program by turning the dial
to Stop, the door lock remains engaged for a two-minute safety delay,
after which you may open the machine door. To restart the machine,
reposition the Program Knob and press Start (G).
If you wish to use the drying function only, turn Program Knob to dry
and set the drying time with the Drying Time Knob.
and set the drying time with the Drying Time Knob.
Note: Before starting a program, the machine will drain
any water already in the machine, so you may need to add
detergent before you press Start (G).
any water already in the machine, so you may need to add
detergent before you press Start (G).
Cycle Indicator Lights (C)
The light indicates progress of the wash/dry cycle as it occurs.
When the Stop light glows, the program is complete. After a two-
minute delay, the door lock will release so you can open the door.
When the Stop light glows, the program is complete. After a two-
minute delay, the door lock will release so you can open the door.
Drying Time Knob (D)
Set knob to the number of minutes you wish to dry the load. See
page 11 for recommended dry times. To prevent over-drying and
damage to sensitive fabrics, start with a shorter time and add time
until the load is dry. To use the dry function only, turn Program Knob
to dry, set Drying Time Knob to number of minutes desired and press
Start (G).
page 11 for recommended dry times. To prevent over-drying and
damage to sensitive fabrics, start with a shorter time and add time
until the load is dry. To use the dry function only, turn Program Knob
to dry, set Drying Time Knob to number of minutes desired and press
Start (G).
PRE-WASH / WASH
RINSE
SPIN
DRY
STOP
G Start Button
F Extra Rinse Button
E Prewash Button
C Cycle Indicator Lights
A On/Off Button
D Drying Time Knob
B Program Knob
(C)
(A)
(E)
(F)
(G)