Bosch 8-Dec Manual Do Utilizador

Detectors and Accessories | Motion PIR | 163

Dimensions:

10.8 cm x 7 cm x 4.6 cm

Material:

High impact ABS plastic enclosure

Operating Temperature:

-10°C to +55°C

Relative Humidity:

<95%, non-condensing

Storage Temperature:

-20°C to +60°C

Radio Frequency Interfer-

ence (RFI) Immunity:

No alarm or setup on critical frequencies in the

range from 10 MHz to 1 GHz at 30 V/m.

Complies with Environmental Class II (EN50130-5)

Height Range:

2 m to 2.6 m

Location:

Wall, corner, and ceiling*

*with B338-3 Ceiling Mount Bracket

Relay Contact:

Normally-closed solid state relay 100 mA at 30 VDC

maximum.

Tamper:

Normally-closed (with cover in place) tamper switch.

Contacts rated at 28 VDC, 125 mA maximum.

Pattern:

Coverage is adjustable -18° to +2° vertically

Input Power:

Use only an approved limited power

source.

Standby Power:

No internal standby battery. Standby

power must be provided by an ap-

proved limited power source. For each

hour of standby time needed, 22 mAh

is required.

Supply Voltage Range:

8.0 VDC to 16.0 VDC

Supply Voltage Nominal:

12.0 VDC nominal

Supply Voltage Maximum Ripple (0

to 100 Hz):

2.0 Vpp

Supply Voltage Monitoring:

Alarm at less than 4.0 V

Provides first step processing, two coverage

patterns, temperature compensation and

three mounting options.

Swiveling, low-profile, plastic mount for wall

mounting. The vertical swivel range is +10° to

-20°, while the horizontal swivel range is ±25°.

Available in triple packs.

Provides long-range coverage with a 21 m x 3 m

(70 ft x 10 ft) pattern. Shipped in packages of

three.