Bosch MUM 6610 UC Manual Do Utilizador
25
TROUBLESHOOTING
Problem
Possible Cause
Remedy
Power
1.A circuit breaker may have
Reset circuit breaker or
unit does
tripped or a fuse has blown
replace fuse.
not
in the power supply circuit.
function
2.The built-in safety cutout
If the safety has tripped due to
may have tripped.
overheating:
> Turn the power unit to the Off
> Turn the power unit to the Off
position, “O/Off,” and unplug.
> Remove the attachment that was
in use when safety tripped, and
correct whatever the situation
is that caused the safety to trip.
correct whatever the situation
is that caused the safety to trip.
> Wait a few minutes (minimum 30
minutes recommended) to allow
the motor to cool.
the motor to cool.
> Depress the manual reset button
on the bottom of the power unit,
see figure 2b.
see figure 2b.
> Reinstall the attachment and
resume use per attachment’s
instructions.
instructions.
Power
1.The motor has become
> Turn the power unit to the Off
unit hums
blocked; that is, the
position, “O/Off,” and unplug.
but
attachment being used has
> Remove the attachment
nothing is
become jammed.
that was in use and correct
moving
whatever the situation is that
is causing the blockage.
is causing the blockage.
> Reinstall the attachment and
resume use per attachments
instructions.
instructions.