Weil-McLain PLUS LINE PLUS-E017-A/1206 Manual Do Utilizador

Part Number PLUS-E017-A/1206

9

   • Installation   • Start-Up   • Usage   • Maintenance   • Parts

Apply the following and Figure 2 to water heaters other than those installed in Massachusetts.

For Commonwealth of Massachusetts installations, see Option 2, Figure , page 9.
1.  Install the ¾” NPT brass tee (supplied with water heater) in the domestic water inlet piping

using suitable pipe dope or tape, located as shown in Figure 2.

2.  Pipe the drain valve off of the brass tee as shown in Figure 2, using suitable pipe dope or

tape.

.  For jurisdictions requiring a vacuum breaker, use the piping shown in Figure , page 9,

(Option 2).

A2

An expansion tank may be required on

the DHW piping. See Thermal expansion

on page 1. Failure to comply

could  result  in  severe  personal  injury,

death or substantial property damage.

When the water supply pressure is higher than 0 psig, install a pressure-reducing valve on the cold water supply

line to prevent leakage from the T & P relief valve.