Siemens AC75 Manual Do Utilizador
AC75 AT Command Set
11.11 AT+CGQREQ
s
AC75_ATC_V01.002
Page 332 of 569
10/30/06
Confidential / Released
11.11
AT+CGQREQ Quality of Service Profile (Requested)
Syntax
Command Description
The test command returns values supported as a compound value. If the MT supports several PDP types, the
parameter value ranges for each PDP type are returned on a separate line.
The read command returns the current settings for each defined context.
This command allows the TE to specify a Quality of Service Profile that is used when the MT sends an Activate
The read command returns the current settings for each defined context.
This command allows the TE to specify a Quality of Service Profile that is used when the MT sends an Activate
PDP Context Request message to the network.
The set command specifies a profile for the context identified by the (local) context identification parameter,
A special form of the set command, +CGQREQ=
to become undefined.
and
will undefine the QoS profiles of every context which is not active or not online.
Parameter Description
Parameter specifies a particular PDP context definition. The parameter is local to the TE-MT interface and is
used in other PDP context-related commands.
1...2
1...2
Precedence class
[0]
[0]
network subscribed value
1
High Priority
Service commitments shall be maintained ahead of precedence classes 2 and
3
Test Command
AT+CGQREQ=?
Response(s)
, (list of supported
s), (list of supported
s), (list of
s), (list of supported
s), (list of supported
s)
OK
Read Command
AT+CGQREQ?
Response(s)
[+CGQREQ:
]
[+CGQREQ: ...]
Write Command
AT+CGQREQ=
[
]]]]]]
Response(s)
OK
ERROR
+CME ERROR
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07
+
+
+
+
+
+
+
-
+
-
<cid>
(num)
<precedence>
(num)