Hitachi IP5000 Manual Do Utilizador
mode=code
Simple change the user.ini line to read:
[3]
name=user%M.ini
mode=code
name=user%M.ini
mode=code
This will cause the unit to request the ‘loadrun.ini’ and then ‘user000000000000.ini’ for
each phone configured. ‘000000000000’ will represent the MAC address of each specific
unit.
each phone configured. ‘000000000000’ will represent the MAC address of each specific
unit.
Changing the Configuration:
•
Prior to making any changes, the Administrator’s Guide and the Web Manual should be
consulted.
consulted.
•
Changes can be made via the web interface or the .ini file can be modified and re-
downloaded to the IP5000, noting the issues above regarding environments with multiple
units.
downloaded to the IP5000, noting the issues above regarding environments with multiple
units.
•
Examples of the more significant portions of the web interface. This is not a
comprehensive web interface tutorial but intended to ensure that all settings required for
compatibility with xIC are selected. If a particular section is not shown here, then the
defaults were used:
comprehensive web interface tutorial but intended to ensure that all settings required for
compatibility with xIC are selected. If a particular section is not shown here, then the
defaults were used:
Time
•
Enable NTP
On
Off
•
Date Format
Sun DD Jan,YY
•
Time Format
24 hours
hours
•
Time Zone
GMT-05:00
•
Enable Daylight Saving Time
On
Off (DST)
•
DST Start Month
4
•
DST Start Day
2
•
DST Start Hour
2
•
DST Start Min
0
•
DST End Month
10
•
DST End Day
29
•
DST End Hour
2
•
DST End Min
0
•
NTP Refresh Interval (60~3153600)
7200
•
NTP Server1
172
.
16
.
1
.
2
•
NTP Server2
192
.
43
.
244
.
18