Fujitsu DX60 Manual Do Utilizador
Chapter 5 Installing Optional Products
5.1 Installing Disks
5.1 Installing Disks
ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-
58
Copyright 2012 FUJITSU LIMITED
P3AM-5512-03ENZ0
5.1.3
Disk Handling Instructions
■
About condensation
■
About static electricity
CAUTION
Do
•
When moving a disk from a cold place, such as an un-conditioned
store house in winter, to a warmer places such as an air-conditioned
room, the severe temperature change may result in condensation
forming.
To avoid this, allow the packed disks sufficient time in the warmer
place (one hour for each 15
store house in winter, to a warmer places such as an air-conditioned
room, the severe temperature change may result in condensation
forming.
To avoid this, allow the packed disks sufficient time in the warmer
place (one hour for each 15
°C of temperature difference) to adapt to
the new temperature.
CAUTION
Do Not
•
Do not touch the surface of the board of the disks.
Do
•
When handling disks, make sure to wear a wrist strap or touch a metal
part to discharge the human body's natural static electricity. Failure to
discharge static electricity may cause device failure.
part to discharge the human body's natural static electricity. Failure to
discharge static electricity may cause device failure.
•
Leave the disk in its package until ready to install it.