Fujitsu DX60 Manual Do Utilizador
Appendix A Event Notification Message List
A.1 Message Format
A.1 Message Format
ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-
90
Copyright 2012 FUJITSU LIMITED
P3AM-5512-03ENZ0
A.1.2
SNMP
The ETERNUS DX Disk storage system supports SNMPv1.
To monitor the ETERNUS DX Disk storage system using SNMP Trap, software that can receive
and analyze SNMP Traps must be used on the network.
This section describes the type and the notification format of Traps. For details on the messages
that are notified by SNMP Trap, refer to
To monitor the ETERNUS DX Disk storage system using SNMP Trap, software that can receive
and analyze SNMP Traps must be used on the network.
This section describes the type and the notification format of Traps. For details on the messages
that are notified by SNMP Trap, refer to
.
For the display contents of events (SNMP Traps) when using the server management software
"ServerView Operation Manager" for monitoring the ETERNUS DX Disk storage system, refer to
"ServerView Operation Manager" for monitoring the ETERNUS DX Disk storage system, refer to
■
Trap type
There are two types of Traps: Generic Trap (standard Trap) and Specific Trap (extended Trap).
Generic Trap is a Trap that is defined by the SNMP protocol. Specific Trap is a Trap that has
been created specifically for the ETERNUS DX Disk storage system. The ETERNUS DX Disk
storage system supports the following types of Traps:
Generic Trap is a Trap that is defined by the SNMP protocol. Specific Trap is a Trap that has
been created specifically for the ETERNUS DX Disk storage system. The ETERNUS DX Disk
storage system supports the following types of Traps:
●
Generic Trap (standard Trap)
●
Specific Trap (extended Trap)
Trap No.
Name
Description
0
coldStart
For an ETERNUS DX Disk storage system, this Trap is
sent when the controller starts up and restarts and
when SNMP is set.
sent when the controller starts up and restarts and
when SNMP is set.
4
authenticationFailure
An unauthorized access occurred.
6
enterpriseSpecific
Extended Trap
Trap No.
Name
Description
2
fjdarye101ItemFault
This Trap is sent to notify that a component fails
or degrades.
or degrades.
5
fjdarye101ItemWarning
This Trap is sent to notify that a component
requires preventive maintenance.
requires preventive maintenance.
6
fjdarye101SensorStatusChange
This Trap is sent to notify that a temperature
error is detected.
error is detected.
7
fjdarye101MaintenanceRequired
This Trap is sent to notify that an event requires
maintenance or preventive maintenance.
maintenance or preventive maintenance.
9
fjdarye101Information
This Trap is sent to notify Information-level
events.
events.
22
fjdarye101ItemFaultToNormal
This Trap is sent to notify that an event notified
by Trap No. 2 returns to normal status.
by Trap No. 2 returns to normal status.
25
fjdarye101ItemWarningToNormal
This Trap is sent to notify that an event notified
by Trap No. 5 returns to normal status.
by Trap No. 5 returns to normal status.
26
fjdarye101SensorStatusChangeToNormal
This Trap is sent to notify that an event notified
by Trap No. 6 returns to normal status.
by Trap No. 6 returns to normal status.