Raritan Computer Home Theater Server KX2101-v2.20-0B-E Manual Do Utilizador
Chapter 6: Device Management
163
6. Click OK to configure the analog KVM switch.
To restore analog KVM switch defaults:
•
Click Reset to Defaults.
Resetting the KX II-101 Using the Reset Button
On the back panel of the KX II-101, there is a Reset button. It is
recessed to prevent accidental resets (you will need a pointed object to
press this button).
recessed to prevent accidental resets (you will need a pointed object to
press this button).
The actions that are performed when the Reset button is pressed are
defined in the graphical user interface. See
defined in the graphical user interface. See
Encryption & Share
(on
page 190).
To reset the device:
1. Power off the KX II-101.
2. Use a pointed object to press and hold the Reset button.
3. While continuing to hold the Reset button, power the KX II-101
device back on.
4. Continue holding the Reset button for 5-10 seconds.
5. Release the Reset button and the KX II-101 will reboot. This typically
takes three minutes.