Viper Basic 1_Way Manual Do Proprietário
5
© 2012 Directed. All rights reserved.
Using Remote Start
Important! (1) Never remotely start the vehicle with the ve-
hicle in gear, and (2) Never remotely start the vehicle with
the key in the ignition.
hicle in gear, and (2) Never remotely start the vehicle with
the key in the ignition.
Starting the Engine:
1. Press and release the remote control button.
2. The engine will START and the parking lights will turn on. The
1. Press and release the remote control button.
2. The engine will START and the parking lights will turn on. The
transmit LED flashes once.
3. The parking lights stay on as visual confirmation while the engine
is ON. The default runtime is 12 minutes and can be shortened or
extended by the installer.
extended by the installer.
If you wish to warm or cool the vehicle interior set the climate controls
to the desired temperature prior to starting.
to the desired temperature prior to starting.
Key Takeover
When you are ready to drive the vehicle:
1. Unlock the doors
2. Enter the vehicle. Do not step on the foot brake
3. Insert the key, turn it to the run (not start) position. Step on the foot
1. Unlock the doors
2. Enter the vehicle. Do not step on the foot brake
3. Insert the key, turn it to the run (not start) position. Step on the foot
brake. The remote start is disabled and the parking lights turn off.
4. Begin driving.
Note
If your vehicle uses a Smart Key or PTS (Push-To-Start) sys-
tem, please refer to the vehicle specific instructions included
with the owner's guide of the interface module or consult
your authorized dealer.
tem, please refer to the vehicle specific instructions included
with the owner's guide of the interface module or consult
your authorized dealer.