T+A Elektroakustik P 10 Manual Do Utilizador
9
9
9
9
Screen
The front panel of the P10 incorporates a screen which
provides information about the amplifier’s operational
state. Additional information can also be called up on the
screen when desired.
provides information about the amplifier’s operational
state. Additional information can also be called up on the
screen when desired.
The meaning of the individual illuminated symbols is
listed in the table below.
listed in the table below.
Symbol
Function
a
Recording monitor function switched on
b
½
Flashing indicator
• Flashes when switched on:
Indicates power-on delay running
•
Flashes when in use:
Indicates that the protective circuit has tripped due to overheating or overloading of the
amplifier (see section 'Protective circuit').
Indicates that the protective circuit has tripped due to overheating or overloading of the
amplifier (see section 'Protective circuit').
c
HEAT Valve heating switched on
d
HV
Main operating voltage (high voltage) switched on; amplifier ready for use
e
½
CHINCH OUT
f
½
XLR OUT
g
½
Standby LED
h
PHO
Headphone output switched on
i
FLOAT
k
LOUDNESS
Glows when the volume-dependent loudness control is switched on.
Glows when the volume-dependent loudness control is switched on.
l
Alpha-numeric display field
29