Navini Networks Ripwave 40-00097-00 Manual Do Utilizador

Navini 

Networks, 

Inc. 

       Ripwave 

Modem 

User 

Guide 

Part #40-00097-00 Rev E v1.0 

 

Copyright © 2003 Navini Networks, Inc.  All rights reserved.   

           29 

July 30, 2003 

 

 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
The battery pack is an option and is not included with the unit. To 
order a battery for the Ripwave Modem, contact your Service 
Provider or the vendor from whom you purchased the Modem. 
 
The battery pack is installed in the bottom of the Ripwave Modem. 
The battery compartment of the 2.4 GHz Ripwave Modem varies 
from the 2.3, 2.5, and 2.6 GHz models. To install and charge or 
remove the battery pack, follow the steps based on your model. 
 
 
Step  Action 

1. 

Squeeze both tabs to 

remove or install the 

battery pack cover.  

Note that the cover is 

not used when the 

battery pack is installed 

in the Modem. 

 

2. 

Install the battery pack 

into the Ripwave 

Modem, ensuring that 

the contacts on the 

battery pack mate with 

the contacts in the 

Modem and that both 

slides snap down 

securely. 

 

3. 

To charge the battery, 

connect the AC adapter 

to the Modem and to an 

AC power source. The 

battery will begin 

charging immediately 

regardless of whether 

the On/Off switch is on. 

However, the pack will 

charge faster if the 

on/off switch is in the 

OFF position. 

 

If the on/off switch is 

ON, the light indicator 

will be constant yellow. 

When fully charged, the 

light will go off. 

 

 

.

 

.

.

 

.