Kamera Werk Dresden NOBLEX 135 Manual Do Utilizador
KAMERA WERK DRESDEN GmbH
Page 7 of 9
NOBLEX for Advanced Users
Lens Shift
When using the lens shift the subject is moved upwards without tilting the camera. Converging lines
can thus be avoided. In order to shift the lens follow these instructions:
can thus be avoided. In order to shift the lens follow these instructions:
(1) Turn the aperture selector wheel (1) to aperture f=4.5.
(2) Push the whole aperture selector wheel (1) further upwards until it reaches a stop
(2) Push the whole aperture selector wheel (1) further upwards until it reaches a stop
at app. 4mm.
(3) The white dot will be in position »S« and the lens is shifted upwards. 1
(4) Select your aperture and set it on the aperture selector wheel (1).
(4) Select your aperture and set it on the aperture selector wheel (1).
Please note
A »cut-out« is provided in the viewfinder to help determine the top edge of the »shifted« photograph.
In order to return the lens to its normal position follow these instructions:
(1) Turn the aperture selector wheel (1) to aperture f=16.
(2) Push the whole aperture selector wheel (1) further downwards until it stops: app. 4mm.
(3) The white dot will be in position »0« now and the lens has its normal position back.
(4) Select your aperture and set it on the aperture selector wheel (1).
(2) Push the whole aperture selector wheel (1) further downwards until it stops: app. 4mm.
(3) The white dot will be in position »0« now and the lens has its normal position back.
(4) Select your aperture and set it on the aperture selector wheel (1).
Multiple Exposures
In order to expose one frame of film more than once, switch the double exposure button (6) to position
»M«. Press the shutter release knob (4) once for a single exposure. This procedure can be repeated
as often as you wish. Keeping the shutter release knob (4) pressed. the lens will continue to rotate and
the exposing process is repeated until you release the knob (4). The complete exposure time consists
of all single exposure times. You will find a corresponding table on page 12:
»M«. Press the shutter release knob (4) once for a single exposure. This procedure can be repeated
as often as you wish. Keeping the shutter release knob (4) pressed. the lens will continue to rotate and
the exposing process is repeated until you release the knob (4). The complete exposure time consists
of all single exposure times. You will find a corresponding table on page 12:
Please note
We recommend using a tripod and cable release for most applications of multiple exposures.
Filters
As an accessory for NOBLEX cameras we offer a wide range of filters. NOBLEX filters are specially
designed with a magnetic ring on the back surface of the filter. The filter can thus directly be fixed to
the lens. For inserting the filter follow these instructions:
designed with a magnetic ring on the back surface of the filter. The filter can thus directly be fixed to
the lens. For inserting the filter follow these instructions:
(1) Turn the camera off at the ON/OFF
switch (10).
(2) Push the double exposure button (6) to
position »M«.
(3) Press the shutter release knob (4) and
hold it pressed.
(4) Turn the lens drum clockwise until the
lens is visible.
(5) Release the shutter release knob (4)
now.
(6) Put the camera on it's back.
(7)
(8) Pick up the filter by the hole of the filter
(7)
(8) Pick up the filter by the hole of the filter
ring using a pair of tweezers and insert it
through the shutter slit. Place the filter
onto the lens. The filter is then
magnetically held onto the front of the
lens.
through the shutter slit. Place the filter
onto the lens. The filter is then
magnetically held onto the front of the
lens.
(9) Turn the lens drum back until it is engaged.
(10) Push the double exposure button (6) back to single exposure, if desired.
(11) When removing the filter follow the same procedure.
(10) Push the double exposure button (6) back to single exposure, if desired.
(11) When removing the filter follow the same procedure.