AVerMedia Technologies AVerVision530 Manual Do Utilizador

 

Restore to original factory setting 

Select between text and graphic image enhancement mode  

Display the image from AVerVision530 camera or from the PC IN port 

Freeze image  

Adjust White Balance 

Adjust Exposure 

Control the video display by moving the progressive bar 

Play and control the video display 

Record the video and save it into the PC 

Capture a single picture and save it into the PC 

Locate the saved picture or video clips 

Setup for the picture snapshot or video recording. 

This enables you to transfer the captured image to and from the memory source and PC.   

: You MUST read and follow the instructions below BEFORE connecting the USB cable.  

Every time when using the AVerVision530 as Mass Storage, you MUST do the following: 
1.  Select the memory source.  

To select the memory source, press MENU > select ADVANCED and 
press (►ENTER) > select MEMORY and press (►ENTER) > select 
TYPE 

and press (►ENTER) > select the source and press (►ENTER) 

> press MENU to exit.  

2.  MUST set the USB SELECT as Mass Storage before connecting the 

USB cable.  
To set the USB SELECT as Mass Storage, press MENU > select 
ADVANCED

 and press (►ENTER) > select USB SELECT and press 

(►ENTER) > select MASS STORAGE and press (►ENTER).  

3.  When “STORAGE” appears at the lower left corner of the 

presentation screen, you may now connect the USB cable. ( See 
“Connecting to Computer thru USB Connection” for illustration) 

4.  Upon connecting the USB cable, the system automatically detects 

the new removable disk. 

5.  In the Removable Disk dialog box, select Open folder to view files 

and then click OK.  You may now transfer the file to and from your 
PC hard disk.  

18