DMP Electronics Inc. Smoke Alarm XR2400F Manual Do Utilizador

5

Many of the features of your system have been put into a User Menu
that you can access from the Fire Command Center or the Remote
Fire Command Center. The menu requires you to enter your user
code and then only shows those functions to which you have access.

Some features displayed on the User Menu are not necessary for the
XR2400F Addressable Fire Alarm Control Panel .  Please disregard
these prompts and displays.  You may skip any displays and prompts
not discussed in this User Guide by pressing the COMMAND key.

1. Press the COMMAND key until MENU?   NO  YES displays.

2. Select YES. The display shows ENTER CODE:  –. Enter your

user code and press COMMAND. You can now scroll down
through the list of system features available to your authority
level.

The list below shows the User Menu options in the order they will
appear in the display.  A description of the options follows in this
guide.

Silences an alarm bell or siren.

Resets smoke detectors that have
latched due to an alarm condition.

Allows you to turn on or off any of the
outputs.

Allows you to enter a zone number and
see if that zone is either armed,
bypassed, in alarm, open, or shorted.

Displays the current condition of the
system's AC power, backup battery, and
panel tamper (optional).

Tests the system's siren, communication
to the central station, and backup battery.

Allows you to add, delete, or change
user codes and authority levels.

Allows you to change the Day, Date, or
Time that is currently in the system.

Allows you to view or print the last 200
events that occurred on your system.

SERVICE REQUEST Allows you to send a message to the

central station requesting service on the
alarm system.

Allows you to test the system’s
notification appliances, such as fire bells.

The following pages detail each user menu item and provide
instructions on when and how to use them properly.