Vinotemp VTBC34TS Manual Do Proprietário

6 

 

 

 
For your protection, this unit should be properly 
grounded. Unit is equipped with a 3-conductor 
cord set that has a molded 3-prong grounding-
type plug, and should be used in combination 
with a properly connected grounding-type outlet 
as shown in figure A.  
 
It is not recommended to use this beverage 
cooler  with  an  extension  cord  or  power  board.  Please  ensure  that  the 
appliance is plugged directly into the electrical outlet. 
 

•  Remove the exterior and interior packaging before use. 

•  Check to be sure you have all of the parts and 1 owner’s manual. 

•  Place your beverage cooler on a flat, dry surface that is strong enough 

to support the unit when fully loaded. 

•  This unit is designed for free standing installation only.  

•  Do not place heavy objects on top of the unit. 

•  Unit is not designed for installation in a garage, basement, or any 

other location where a controlled ambient environment between 60° 
and 90°F cannot be maintained. 

•  Do not place the unit in direct sunlight or near sources of heat. 

Extreme hot and cold ambient temperatures may cause the unit not to 
perform properly or increase electrical consumption. 

•  Do not place the unit next to a major appliance that emits large 

amounts of heat, such as a dishwasher, microwave, oven, etc. 

•  Do not plug unit into the same outlet as a refrigerator or microwave. 

•  Before connecting the appliance to the power source, let it stand 

upright for approximately 24 hours. This will reduce the possibility of a 
malfunction in the cooling system from handling during transportation. 

•  Clean the interior surface with lukewarm water using a soft cloth 

before first use. 

•  IMPORTANT: To function correctly, beverage cooler needs a minimum 

of 1 inch clearance on each side and 4 inches clearance at the back 
side.