Elica ENM236SS Instrução De Instalação
3
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed (all models)
Read and follow the instructions provided with any tools listed
here.
Tools needed (all models)
Drill
1¹⁄
1¹⁄
4
” (3.0 cm) drill bit
¹⁄
8
” (3.0 mm) drill bit for pilot holes
Pencil
Wire stripper or utility knife
Tape measure or ruler
Caulking gun and weatherproof caulking compound
Flat-blade screwdriver
Phillips screwdriver
Wire stripper or utility knife
Tape measure or ruler
Caulking gun and weatherproof caulking compound
Flat-blade screwdriver
Phillips screwdriver
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Saber or keyhole saw
Metal snips
Compass or 8” (20.3 cm) circle template
Metal snips
Compass or 8” (20.3 cm) circle template
Parts Supplied (all models)
4 - 3.5 x 9.5 mm mounting screws
T-10 Torx®† adapter
T-10 Torx®† adapter
Parts Needed (all models)
3 - UL listed wire connectors
Vent clamps
Vent clamps
For cabinets with recessed bottoms:
Two 2” (5.1 cm) wide filler strips. Length and thickness
determined by recess dimensions.
Four flat head wood screws or machine screws with washers
and nuts (to attach filler strips).
■
■
■
■
■
■
■
■
■
■
■
■
■
Models EFS130 (ducted installation)
Parts Supplied
2 - 3.5 x 9.5 mm screws.
3¹⁄
3¹⁄
4
” x 10” (8.3 x 25.4 cm) rectangular vent connector.
Parts Needed
Wall or roof cap to match vent system
1 - 75W max, 120V incandescent light bulb.
3¹⁄
1 - 75W max, 120V incandescent light bulb.
3¹⁄
4
” x 10” (8.3 x 25.4 cm) rectangular metal vent system
3¹⁄
4
” (8.3 cm) rectangular damper No return valve (optional)
Accessories part No. EXXNRVRT
Models ERS230 (ducted or non ducted
(recirculation) installation)
Parts Supplied
2 - 3.5 x 9.5 mm screws
3¹⁄
3¹⁄
4
” x 10” (8.3 x 25.4 cm) rectangular vent connector
Parts Needed
2 - 40W max, 120V incandescent light bulb
Wall or roof cap to match vent system
Wall or roof cap to match vent system
For 7” (17.8 cm) round vented installations:
7” (17.8 cm) round metal vent system
7” (17.8 cm) round vent mounting plate.
7” (17.8 cm) round vent mounting plate.
Accessories part. No. EXXTRK07
7” (17.8 cm) round damper non return valve (optional).
Accessories part No. EXXNRVRD
For 3¹⁄4” x 10” (8.3 x 25.4cm) rectangular vented installations:
For 3¹⁄4” x 10” (8.3 x 25.4cm) rectangular vented installations:
3¹⁄
4
” x 10” (8.3 x 25.4 cm) rectangular metal vent system
3¹⁄
4
” (8.3 x 25.4 cm) rectangular damper No return valve.
(optional). Accessories part No. EXXNRVRT
For non-vented (recirculation) installations:
For non-vented (recirculation) installations:
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Recirculation kit. Accessories part No. ERSRCK30
Models ESN130 (non ducted [recirculation] installation)
Parts Needed
1 - 75W max, 120V incandescent light bulb.
Models ENM230 / ENM236 (ducted or non ducted
[recirculation] installation)
Parts Supplied
2 - 3.5 x 5 mm screws
3¹⁄4” x 10” (8.3 x 25.4 cm) rectangular vent connector with
3¹⁄4” x 10” (8.3 x 25.4 cm) rectangular vent connector with
damper non return valve
Parts Needed
Parts Needed
2 - 50W max, 120V halogen lamps
Wall or roof cap to match vent system
Wall or roof cap to match vent system
For 7” (17.8 cm) round vented installations:
7” (17.8 cm) round metal vent system
7” (17.8 cm) round vent mounting plate.
7” (17.8 cm) round vent mounting plate.
Accessories part. No. EXXTRK07
7” (17.8 cm) round damper non return valve (optional).
Accessories part No.EXXNRVRD
For 3¹⁄4” x 10” (8.3 x 25.4cm) rectangular vented installations:
For 3¹⁄4” x 10” (8.3 x 25.4cm) rectangular vented installations:
3¹⁄4” x 10” (8.3 x 25.4 cm) rectangular metal vent system
For non-vented (recirculation) installations:
Recirculation kit. ENM230 / ENM236: Accessories part No.
ENMRCK36
■
■
■
■
■
■
■
■
■
■
■
■
■
†®TORX is a registered trademark of Saturn Fasteners, Inc.