Dacor RNR30NS Guia Do Desenho
All specifications subject to change without notice.
Phone: (800) 793-0093
www.dacor.com
PLANNING
GUIDE
RNR30NS, RNR30NFS, RNR30NIS, RNR30NIFS
Renaissance
®
30” Wide
Electric Induction Range
Document # PG05-011
Revised 01/28/15 Page 1/5
WARNING
• Observe all governing codes and ordinances during planning
and installation. Contact your local building department for
further information.
• This appliance must be installed in accordance with the
accompanying installation instructions.
All tolerances ±1/16” (±1.6 mm) unless otherwise noted.
OVERALL DEPTH DIMENSIONS - SIDE VIEW
Product Dimensions
Available Backguard
Part Number Description
Compatibility
ADRB30E06
6 Inch
Standard on models RNR30NS,
RNR30NFS, Optional on models
RNR30NIS, RNR30NIFS
Models RNR30NIS and RNR30NIFS come equipped from the factory
with flat stainless trim piece in place of a backguard. A backguard may be
purchased as an optional accessory. Add an additional 1/16 inch to depth
dimensions below when installing a backguard on models RNR30NIS and
RNR30NIFS.
The trim on models RNR30NS and RNR30NFS are not
compatible with a downdraft vent.
Models RNR30NIS and RNR30NIFS are compatible with Dacor
Models RNR30NIS and RNR30NIFS are compatible with Dacor
downdraft vent model ERV3015 only.
Dimension
RNR30NS,
RNR30NFS
RNR30NIS, RNR30NIFS
A
46 1/4” (117.5 cm)
46 1/16” (117.0 cm)
C
25 1/2” (64.8 cm)
25 5/16” (64.3 cm)
D
23 3/8” (59.4 cm)
23 3/16” (58.9 cm)
Dimension
RNR30NS
RNR30NIS
B
27 7/8” (70.8 cm)
27 11/16” (70.3 cm)
Model Versions
Model
Configuration
Handle Type
RNR30NS[-C]*
Freestanding,
(full size side panels)
Mounted on
outside of door
RNR30NFS[-C]*
Freestanding,
(full size side panels)
Flush handle,
integrated in door
RNR30NIS[-C]*
Built-in/Slide-in
(3” removable side panels)
Mounted on
outside of door
RNR30NIFS[-C]*
Built-in/Slide-in
(3” removable side panels)
Mounted on
outside of door
* Order -C option for corded wiring configuration, see page 3/5 for details.
1” (2.5 cm)
Front of open door
Front of handle
Front panel
Rear of front panel
Front of handle
Front panel
Rear of front panel
Backguard thickness
External handle
shown, some models
have integral handle
(see inside cover)
6” (15.2 cm) backguard*
*
See table for compatibility
Product width:
29 15/16” (76.0 cm)
35”
(88.9 cm)
to
37”
(94.0 cm)
A
B
C
D
RNR30NI[F]S:
3/8” (9.5 mm)
thick top trim
RNR30N[F]S:
full stainless
steel side panels
RNR30NI[F]S:
3” (7.6 cm)
partial stainless
steel side panels
(removable)