GE GSD3301J Guia Da Instalação

Página de 32
Installation Preparation – Enclosure
PREPARE DISHWASHER ENCLOSURE 
Figure A
To reduce the risk of shock, fire, or injury 
to persons, the installer must ensure that 
the dishwasher is completely enclosed at 
the time of installation.
• The rough cabinet opening must have a minimum 
width and depth of 24" and height of 34-1/2" ± 1/4" 
IURPWKHÀRRUWRWKHXQGHUVLGHRIWKHFRXQWHUWRS
• The back wall should be free of pipes or wires.
• Adjacent cabinets should be square and plumb to 
HQVXUHDJRRG¿W5HIHUWR)LJXUH$
• For a corner installation, allow 2" minimum 
clearance between the dishwasher and the 
adjacent wall.
• Provide at least 27" in front of the dishwasher to 
allow the dishwasher door to open fully. Refer to 
Figure B.
‡0DNHVXUHWKHÀRRULVOHYHOLQVLGHWKHRSHQLQJDQG
HYHQZLWKWKH¿QLVKHGÀRRURIWKHNLWFKHQ7KLVZLOO
facilitate removal of the dishwasher at a later date 
for service, if needed.
3
Figure B
• The dishwasher must be installed no more than  
10 feet from sink for proper drainage.
• The dishwasher must be fully enclosed on the top, 
sides and back.
• The dishwasher must not support any part of the 
enclosure.
2" Minimum
Countertop
Dishwasher
27" Minimum
Clearances:
In a corner installation, provide 
at least 2" clearance between 
the dishwasher and the adjacent 
cabinet, wall or other appliance. 
Provide at least 27" of clearance  
in front of the dishwasher.
Para reducir el riesgo de choque, incendio 
o lesión a personas, el instalador se 
debe cerciorar de que la lavadora esté 
completamente cerrada en el momento  
de la instalación.
ADVERTENCIA
WARNING