Bose® WAVE III CD CHANGER Manual Do Utilizador

Página de 14
English – 11
O
PERATION
Connecting an external 
audio source
With the Multi-CD changer connected, any external 
audio devices you may have used with your Wave
®
 
music system can be connected to the back of the 
Multi-CD changer. However, you now need a dual RCA 
stereo cable.
The Wave
®
 music system Multi-CD Changer provides 
two rear panel inputs (AUX 1 and AUX 2) for external 
audio devices such as TV, VCR, DVD player, cassette 
player, or MP3 player. This gives you the advantage of 
hearing Wave
®
 music system sound from a range of 
sources.
To connect a device, connect one end of the cable to the 
audio output jacks of the source and the other end to 
one of the AUX inputs on the changer. Be sure to match 
the red and white plugs on the cable to the red (R) and 
white (L) AUX jacks on the changer.
Connection example:
Playing a connected audio 
source
To listen to a connected source:
1.
Turn on the external device.
2.
Press AUX on the Wave
®
 music system 
remote control. Press AUX again to switch 
between the AUX 1 and AUX 2 inputs. AUX 1 
or AUX 2 appears on the display to confirm your 
selection.
3.
Adjust the volume using the Wave
®
 music system 
remote control.
Note: The Wave
®
 music system remote control cannot 
turn a connected AUX device on or off, or change its set-
tings or selections.
Note: Neither AUX 1 or AUX 2 can be selected as an 
alarm source.
Use only a stereo connection. You will not hear 
the connected device if just the left (L) or right (R) 
channel is connected.
Red
Red
Dual RCA stereo cable
TV
Seine_MDC_OG.book  Page 11  Thursday, February 16, 2012  9:07 AM